BL1200R Remote-controlled Agitators with External Input/Output
The R Series instruments are remote control operation models that are convenient for using inside fume hoods.
Using the external output of the rotation speed and converted torque, the agitating situation can be understood. Then depending on the agitating condition it is possible to control the rotation speed and switch the rotation direction through inputting from an external source, allowing the instrument to be used as part of an agitation system.
Features
- Because the rotation speed and conversion torque values are output as analog voltages, it will be possible to understand changes in viscosity.
- The rotation speed setting and rotation direction switching can be operated through inputs from an external source.
- During the agitating operation, one-switch operation allows the rotation direction to be changed, and the timer allows automatic forward/reverse rotation agitating to be carried out.
- During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained.
- A strong brushless motor is used that does not generate sparks, and the motor part is maintenance-free.
- A collet-type hand-tightening chuck is utilized, and noise countermeasures are implemented to prevent mistaken operation of the instrument or other equipment.
- For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided.
Contact us
Main specifications
| Applications | Medium to Low Viscosity | |||
|---|---|---|---|---|
| Rotation Speed | 20～1200rpm | |||
| Rated Torque | 0.3N･m | |||
| Motor | DC Brushless Motor B Type Insulation 35W | |||
| Rotation Control | Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual) | |||
| Forward/Reverse Rotation Timer |
5, 10, 20, 30, and 45 sec, 1’30, 2’00, 2’30, 3’00, 4’00, and 5’00 Setting Switching Possible | |||
| Rotation Meter | Display Unit: Digital 4 Digits Measurement Units: Resolution 1rpm |
|||
| Rotation Speed Output |
Analog Voltage: DC 0-+5V | |||
| Rotation Speed Input |
Analog Voltage: DC 0-+5V | |||
| Converted Torque Output |
Analog Voltage: DC 0-+5V | |||
| Chuck | φ8mm Collet-type Hand-tightening Chuck | |||
| Safety Equipment | Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover | |||
| Power Cable | 2m Power Cable with 2-pole Grounding Plug | |||
| Power Supply and Consumption |
Single Phase 100V±10%, Joint Use 50/60Hz, 80VA | |||
| Dimensions and Weight |
Main Unit: W135mm x D175mm x H209mm, 2.5Kg Control Box: W118mm x D245mm x H102mm, 1.8Kg |
|||
| Standard Accessories |
Clamp Holder(Type: 21 x 16) 1 piece, Safety Cover | |||
| Options | ||||
Contact us