BL300Ft Agitators with External Output

For the Ft Series, an automatic timer has been added to the forward/reverse rotation function of the general purpose agitator BL Series.

Using the automatic forward/reverse rotation, the agitation efficiency is greatly improved. In addition, the rotation speed and conversion torque are output as analog voltages from the output connector so that changes in viscosity can be measured using a recording meter during the agitation.

Features

Features

  • During the agitating operation, one-switch operation allows the rotation direction to be changed, and the timer allows automatic forward/reverse rotation agitating to be carried out.
  • The rotation speed and conversion torque values are output as analog voltages so that changes in the viscosity can be determined.
  • During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained.
  • A strong brushless motor is used that does not generate sparks, and the motor part is maintenance-free.
  • A collet-type hand-tightening chuck is utilized.
  • Noise countermeasures are implemented so that mistaken operation does not occur and is not caused in other instruments.
  • For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided.

Contact us

Main specifications

 Applications 高粘度用
Rotation Speed 5~300rpm
Rated Torque 1.3N・m
Motor DC Brushless Motor B Type Insulation 40W
Rotation Control Feedback Control, Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse
Rotation Timer
5, 10, 20, 30, 45, or 60 sec Setting Switching Possible
Rotation Speed
Output
Analog Voltage: DC0-5V
Converted Torque Analog Voltage: DC0-5V
Panel Display Rotation Speed Digital 4 Digits and Overload Display; Torque Indicator (1 Graduation 20%)
Chuck φ8mm Collet-type Hand-tightening Chuck
Safety Equipment Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover
Power Cable 2m Power Cable with 2-pole Grounded Plug
Power Supply and
Consumption
Single Phase 100-220V, 120VA
Dimensions and
Weight
Main unit: W135mm x D170mm x H211mm, 2.1Kg
Standard
Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Safety Cover

Contact us

/* 20140217 add by takahashi */