BL300R Remote-controlled Agitators with External Input/Output

The R Series instruments are remote control operation models that are convenient for using inside fume hoods.

Using the external output of the rotation speed and converted torque, the agitating situation can be understood. Then depending on the agitating condition it is possible to control the rotation speed and switch the rotation direction through inputting from an external source, allowing the instrument to be used as part of an agitation system.

Features

Features

  • Because the rotation speed and conversion torque values are output as analog voltages, it will be possible to understand changes in viscosity.
  • The rotation speed setting and rotation direction switching can be operated through inputs from an external source.
  • During the agitating operation, one-switch operation allows the rotation direction to be changed, and the timer allows automatic forward/reverse rotation agitating to be carried out.
  • During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained.
  • A strong brushless motor is used that does not generate sparks, and the motor part is maintenance-free.
  • A collet-type hand-tightening chuck is utilized, and noise countermeasures are implemented to prevent mistaken operation of the instrument or other equipment.
  • For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided.

Contact us

Main specifications

 Applications High Viscosity
Rotation Speed 5~300rpm
Rated Torque 1.0N・m
Motor DC Brushless Motor B Type Insulation 35W
Rotation Control Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse
Rotation Timer
5, 10, 20, 30, and 45 sec, 1’30, 2’00, 2’30, 3’00, 4’00, and 5’00 Setting Switching Possible
Rotation Meter Display Unit: Digital 4 Digits
Measurement Units: Resolution 1rpm
Rotation Speed
Output
Analog Voltage: DC 0-+5V
Rotation Speed
Input
Analog Voltage: DC 0-+5V
Converted Torque
Output
Analog Voltage: DC 0-+5V
Chuck φ8mm Collet-type Hand-tightening Chuck
Safety Equipment Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover
Power Cable 2m Power Cable with 2-pole Grounding Plug
Power Supply and
Consumption
Single Phase 100V±10%, Joint Use 50/60Hz, 80VA
Dimensions and
Weight
Main Unit: W135mm x D175mm x H209mm, 2.5Kg
Control Box: W118mm x D245mm x H102mm, 1.8Kg
Standard
Accessories
Clamp Holder(Type: 21 x 16) 1 piece, Safety Cover
Options

Contact us

/* 20140217 add by takahashi */