BLW300 Mini-Plant-Class Agitators
A 120W motor is utilized in the BLW Series with the purpose of agitating high viscosity liquids, and the torque has been further increased in this Three-One Motor.
Capable of supporting high viscosity levels that are not possible with the BL (40W) Series and BLh (80W) Series, this greatly increases the breadth of laboratory work that can be carried out.
To also support experiments and production that were previously carried out, the rotation control (forward/reverse rotation switching, forward/reverse rotation timer) and ease of use are inherited from the Three-One Motor.
- Utilizes a specially developed high-performance 120W brushless motor. The high rotation speed BL3000 has been added to the BLW Series to seek even higher viscosity agitation.
- During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained.
- A strong brushless motor is used that does not generate sparks.
- Utilizes a 13mm diameter drill chuck to support high viscosity agitation.
- Noise that would cause mistaken operation of other equipment is not output, and noise countermeasures are implemented to prevent mistaken operation even when noise is received.
- For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided.
|Motor||DC Brushless Motor B Type Insulation (130deg C) 120W|
|Rotation Control||Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)|
|5, 10, 20, 30, 45, and 60 sec Setting Switching Possible|
|Panel Display||Rotation Speed Digital 4 Digits and Overload Display; Torque Indicator (1 graduation 20%)|
|Chuck||Ï†13mm Drill Chuck *Up to 12mm shafts accepted|
|Safety Equipment||Current Restricting Circuit, Motor Axis Restricting Protection Circuit,
Thermal Protector: Motor Coil Temperature 90deg C
|Power Cable||2m Power cable with 2-pole Grounded Plug|
|Power Supply and
|Single Phase 100VÂ±10%, Joint Use 50/60Hz, 200VA|
|Main Unit W160mm x D225mm x H218mm, 5.8Kg|
|Standard Accessories||Clamp Holder (Type: 21 x 16) 1 piece|