EN
Image of BL300R/BL600R
Remote-controlled Agitators with External Input/Output
BL300R/BL600R

The R Series instruments are remote control operation models that are convenient for using inside fume hoods.
Using the external output of the rotation speed and converted torque, the agitating situation can be understood. Then depending on the agitating condition it is possible to control the rotation speed and switch the rotation direction through inputting from an external source, allowing the instrument to be used as part of an agitation system.

Features
  • Because the rotation speed and conversion torque values are output as analog voltages, it will be possible to understand changes in viscosity.
  • The rotation speed setting and rotation direction switching can be operated through inputs from an external source.
  • During the agitating operation, one-switch operation allows the rotation direction to be changed, and the timer allows automatic forward/reverse rotation agitating to be carried out.
  • During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained.
  • A strong brushless motor is used that does not generate sparks, and the motor part is maintenance-free.
  • A collet-type hand-tightening chuck is utilized, and noise countermeasures are implemented to prevent mistaken operation of the instrument or other equipment.
  • For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided.
Feature image
Specifications
BL300R/BL600R
Applications
BL300R : High Viscosity
BL600R : High to Medium Viscosity

Rotation Speed
BL300R : 5～300rpm
BL600R : 10～600rpm
Rated Torque
BL300R : 1.0N･m
BL600R : 0.5N･m
Motor
DC Brushless Motor B Type Insulation 35W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, and 45 sec, 1’30, 2’00, 2’30, 3’00, 4’00, and 5’00 Setting Switching Possible
Rotation Meter
Display Unit: Digital 4 Digits
Measurement Units: Resolution 1rpm
Rotation Speed Output
Analog Voltage: DC 0-+5V
Rotation Speed Input
Analog Voltage: DC 0-+5V
Converted Torque Output
Analog Voltage: DC 0-+5V
Chuck
φ8mm Collet-type Hand-tightening Chuck
Safety Equipment
Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover
Power Cable
2m Power Cable with 2-pole Grounding Plug
Power Supply and Consumption
Single Phase 100V±10%, Joint Use 50/60Hz, 80VA
Dimensions and Weight
Main Unit: W135mm x D175mm x H209mm, 2.5Kg
Control Box: W118mm x D245mm x H102mm, 1.8Kg
Standard Accessories
Clamp Holder(Type: 21 x 16) 1 piece, Safety Cover
Options
Catalog
Image of catalog
Download PDF Catalog

For inquiries about our products, requests for catalogs, etc., please use this form.

REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED

For catalog requests and product inquiries,
please contact us using the inquiry form.

Inquiry Form