EN
Image of BL600Z+
Vertical Motion Rotating Agitator
BL600Z+

Repeats an up/down both-way movement while the agitator blades are rotating.
Compared with agitation consisting of rotation only, the agitating efficiency has been greatly improved. The circumferential flows that are generated in rotation agitation which reduce the mixing efficiency are avoided and axial direction flows are easily created to realize unified agitation throughout the tank in a short time.
In high viscosity agitation, the ring-shaped unmixed area that is normally difficult to identify will not be generated. In addition, in the case of a deep-bottomed tank, there will be an effect during agitation with multi-level blades that will act to prevent level separation.

Features
  • While rotating the agitator blades, a both-way up and down movement is repeated.
  • During the agitation, even if there are changes in viscosity the set rotation speed will be maintained.
  • Incorporates noise countermeasures to avoid mis-operation or causing interference in other equipment.
  • Wide range of usage is possible, from low viscosity to high viscosity.
  • A strong brushless motor is utilized that is maintenance-free.
  • During agitating work, one-switch operation changes the rotation direction.
Operation image
Specifications
BL600Z+
Applications
Medium to High Viscosity
Rotation Speed
10～600rpm
Rated Torque
0.7N･m
Motor
DC Brushless Motor B Type Insulation 40W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, 60sec Setting Switching Possible
Vertical Both-way Distance
30mm
Vertical Both-way Speed
8 rotations/1 Return
Panel Display
Rotation Speed Digital 4 Digits, and Overloading Display; Torque Indicator (1 graduation 20%)
Chuck
φ8mm Collet-type Hand-tightening Chuck
Safety Equipment
Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover
Power Cable
2m Power Cable with 2-pole Grounded Plug
Power Supply and Consumption
Single Phase 100V±10% Joint use 50/60Hz 120VA
Option110-230V
Dimensions and Weight
Main Unit: W135mm x D175mm x H203mm, 3.5Kg
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Safety Cover

For inquiries about our products, requests for catalogs, etc., please use this form.

REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED

For catalog requests and product inquiries,
please contact us using the inquiry form.

Inquiry Form