Image of BLh300/BLh600/BLh1200/BLh3000
High Power General Purpose Agitator
BLh300/BLh600/BLh1200/BLh3000

The series utilizes a high output 80W brushless motor that was developed to handle demanding agitation situations.
These strong laboratory agitators generate twice as much torque as the BL series.
The automatic forward/reverse rotation function with timer allows changing of the rotation direction to eliminate the ring-shaped unmixed area that is generated with one-directional agitation.

Features
  • Realizes twice as much torque from approximately the same size as the previous BL Series instruments, allowing high viscosity agitation and the use of large sized blades.
  • The exceptional quietness will not interfere with the laboratory environment.
  • During the agitation, even if there are changes in viscosity the set rotation speed will be maintained.
  • Utilizes a powerful brushless motor that does not generate sparks.
  • During agitating work, one-switch operation changes the rotation direction.
  • Does not output noise that would adversely affect other equipment, and incorporates measures to prevent mis-operation even when affected by noise.
  • Provided with protection equipment such as a current restricting circuit and thermal protector to protect against agitator motor overloading.

* Note: Compared with this company�fs BL Series products. Actually has become larger by D15mm, H10mm.

Operation image
Specifications
BLh300/BLh600/BLh1200/BLh3000
Applications
BLh300:High Viscosity
BLh600:Medium to High Viscosity
BLh1200:Medium to Low Viscosity
BLh3000:Low Viscosity
Rotation Speed
BLh300:5~300rpm
BLh600:10~600rpm
BLh1200:20~1200rpm
BLh3000:50~3000rpm
Rated Torque
BLh300:2.6N・m
BLh600:1.3N・m
BLh1200:0.6N・m
BLh3000:0.2N・m
Motor
BLh300 : DC Brushless Motor B Type Insulation (130℃) 70W
BLh600/BLh1200/BLh3000 : DC Brushless Motor B Type Insulation (130℃) 80W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, 60 sec Setting Switching Possible
Panel Display
Rotation Speed Digital 4-digits, and Overloading Display; Torque Indicator (1 graduation 20%)
Chuck
φ8mm Collet-type Hand-tightening Chuck
Safety Equipment
Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90℃, Safety Cover
Power Cable
2m Power Cable with 2-pole Grounded Plug
Power Supply and Consumption
Single Phase 100V±10% Joint Use 50/60Hz 200VA
Option 110-230V
Dimensions and Weight
Main Unit: W135mm x D170mm x H211mm, 2.2Kg
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Safety Cover

For inquiries about our products, requests for catalogs, etc., please use this form.

REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED

For catalog requests and product inquiries,
please contact us using the inquiry form.