BL Safety Series General-Purpose Agitators
BL300Saf/BL600Saf/BL1200Saf/BL3000Saf
A safety model of the general-purpose agitator with a maintenance-free brushless motor, equipped with a full-guard safety cover. The interlock function stops rotation when the cover is opened. The forward/reverse rotation function also eliminates the ring-shaped unmixed region that occurs with one-directional agitation.
Features
- Large acrylic cover that allows the operation to be observed
- Interlock function
- Large case design that covers both the chuck and the drive shaft
- The exceptional quietness will not interfere with the laboratory environment
- During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained
- A strong brushless motor is used that does not generate sparks
- The rotation direction can be switched with a single switch during agitation
- Noise that would cause mistaken operation of other equipment is not output, and noise countermeasures are implemented to prevent mistaken operation even when noise is received
- For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided
Specifications
BL-Saf Series
Applications
BL300Saf：High Viscosity
BL600Saf：Medium to High Viscosity
BL1200Saf：Medium to Low Viscosity
BL3000Saf：Low Viscosity
BL600Saf：Medium to High Viscosity
BL1200Saf：Medium to Low Viscosity
BL3000Saf：Low Viscosity
Rotation Speed
BL300Saf：5～300rpm
BL600Saf：10～600rpm
BL1200Saf：20～1200rpm
BL3000Saf：50～3000rpm
BL600Saf：10～600rpm
BL1200Saf：20～1200rpm
BL3000Saf：50～3000rpm
Rated Torque
BL300Saf：1.3N･m
BL600Saf：0.7N･m
BL1200Saf：0.3N･m
BL3000Saf：0.1N･m
BL600Saf：0.7N･m
BL1200Saf：0.3N･m
BL3000Saf：0.1N･m
Motor
DC Brushless Motor, B Type Insulation, 40W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Timer Function
Forward/Reverse Rotation Timer Function, Agitation Stop Timer Function
Panel Display
Rotation Speed Digital 4 Digits and Overload Display; Torque Indicator (1 graduation 20%)
Chuck
φ8mm Collet-type Hand-tightening Chuck
Safety Equipment
Current Restricting Circuit, Thermal Protector: Motor Coil Temperature 90deg C, Full-Guard Safety Cover, Interlock Mechanism
Power Cable
2m Power Cable with 2-pole Grounded Plug
Power Supply and Consumption
Single Phase 100V±10%, Joint Use 50/60Hz
Dimensions and Weight
Main Unit: W144mm x D175mm x H242mm, 2.4Kg (excluding free joint and power cable)
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Full-Guard Safety Cover
Contact