BLW Safety Series Mini-Plant-Class Agitators
BLW300Saf/BLW600Saf/BLW1200Saf
A safety model of the 120W mini-plant-class agitator for stirring high-viscosity liquids, equipped with a full-guard safety cover. The interlock function stops rotation when the cover is opened. High-viscosity agitation that is difficult with the BL and BLh Series can be carried out safely.
Features
- Large acrylic cover that allows the operation to be observed
- Interlock function
- Large case design that covers both the chuck and the drive shaft
- Utilizes a specially developed high-performance 120W brushless motor
- During the agitating operation, even if there is a change in the viscosity, the set rotation speed will be maintained
- A strong brushless motor is used that does not generate sparks
- Utilizes a 13mm diameter drill chuck to support high viscosity agitation
- Noise that would cause mistaken operation of other equipment is not output, and noise countermeasures are implemented to prevent mistaken operation even when noise is received
- For the overloading protection of the agitation motor, protection equipment including a current restricting circuit and thermal protector are provided
Specifications
BLW-Saf Series
Rotation Speed
BLW300Saf：5～300rpm
BLW600Saf：15～600rpm
BLW1200Saf：30～1200rpm
BLW600Saf：15～600rpm
BLW1200Saf：30～1200rpm
Rated Torque
BLW300Saf：4.5N･m（45.0Kgf･cm）
BLW600Saf：2.2N･m（22.5Kgf･cm）
BLW1200Saf：1.2N･m（12.5Kgf･cm）
BLW600Saf：2.2N･m（22.5Kgf･cm）
BLW1200Saf：1.2N･m（12.5Kgf･cm）
Motor
DC Brushless Motor, B Type Insulation (130deg C), 120W
Rotation Control
Feedback Control and Forward/Reverse Rotation Switching (Timer mode, manual)
Forward/Reverse Rotation Timer
5, 10, 20, 30, 45, and 60 sec Setting Switching Possible
Panel Display
Rotation Speed Digital 4 Digits and Overload Display; Torque Indicator (1 graduation 20%)
Chuck
φ13mm Drill Chuck *Up to 12mm shafts accepted
Safety Equipment
Current Restricting Circuit, Motor Axis Restricting Protection Circuit,
Thermal Protector: Motor Coil Temperature 90deg C,
Full-Guard Safety Cover, Interlock Mechanism
Thermal Protector: Motor Coil Temperature 90deg C,
Full-Guard Safety Cover, Interlock Mechanism
Power Cable
2m Power cable with 2-pole Grounded Plug
Power Supply and Consumption
Single Phase 100V±10%, Joint Use 50/60Hz, 300VA
Dimensions and Weight
Main Unit W157mm x D210mm x H242mm, 6.5Kg (excluding arm rod and power cable)
Standard Accessories
Clamp Holder (Type: 21 x 16) 1 piece, Full-Guard Safety Cover
Contact