TriboGear Gauge head
Tribogear has an established reputation for its "range" of friction and wear testing, and the Tribogear options dramatically expand the range of testing methods.
In addition to point contact, line and surface contact measurement jigs, etc., a wide variety of jigs are available, including jigs dedicated to pencil hardness testing, and jigs that enable tackiness and peel tests.
Different measurement methods and conditions for Tribogear
Tribogear has an established reputation for its "range" of friction and wear testing, and the Tribogear options dramatically expand the range of testing methods.
In addition to point contact, line and surface contact measurement jigs, etc., a wide variety of jigs are available, including jigs dedicated to pencil hardness testing, and jigs that enable tackiness and peel tests.
Responding to users
Users' test contents are diverse, ranging from the shape of the sample to the material and the content to be measured.
If the standard measurement jig is not enough to cover your needs, please contact us. We will use our know-how to make your "wish" come true.
TriboGear Gauge head
ASTM flat indenter
Adapted specifications: ASTM D1894
Contact surface: 2.5X2.5inch
Can apply surface pressure to the paired test
pieces after the sheet-type test piece is wound
and fixed and the plate-type test piece is bonded.
Application models : 14、18、22、30、34、HHS
30mm flat indenter
Contact surface: 30X30mm
Can apply surface pressure to the paired test
pieces after the sheet-type test piece is wound
and fixed and the plate-type test piece is bonded.
Application models : 14、18、22、30、34、HHS
Ball indenter
Applies point pressure to the plate-and sheettype
test pieces using a secured ball which slides
the test pieces. This device is suitable to
measure the difference between the test pieces
based on the ball.
Application models : 14、18、22、30、34、HHS
Roll holder
Applies linear pressure to the plate -and sheettype
test pieces using a secured roller which
slides the test pieces. This device is suitable to
evaluate transportability.
Application models : 14、30
Blade holder
This device is suitable to measure the wiping
resistance of the rubber blade and to measure
the sliding resistance of the shoe sole to the
floor.
Application models : 14、22、30、34
Tack roller unit
Evaluates the stickiness of adhesives, floor
materials or cosmetics from the rolling
resistance of the stainless roller.
Application models : 14
Steel-wool holder
Holds steel wool, gauze or rubber in order to
measure changes in friction due to the abrasion
of the test piece surface.
Application models : 14、18、22、30、34、HHS
Sand-contained rubber eraser indenter
Holds a cylindrical sand-contained rubber eraser
in order to measure changes in friction due to
the abrasion of the test piece.
Application models : 14、18、22、30、34、HHS
45degree pencil holder
Adapted specifications: JIS K5600 (scratch test)
Measures the scratch hardness of coated
surfaces and evaluates how smoothly pens or
pencils write.
Application models : 14、18、22、30、34、HHS
Scratch needle
Adapted specifications: JIS K6718 Evaluates the
scratch hardness of various materials and the
adhesion of vacuum evaporated or paint film.
Application models : 14、18、22、30、34、HHS
T-shape peeling unit
Adapted specifications: JIS P8139 This T-shape
unit allows the stable measurement of both
peeling resistance and tensile strength.
Application models : 14
Peeling clip
Measures the adhesion and removability of adhesive tape or the peeling resistance and tearing strength of combined board layers. Application models : 14、18、34
Scratch needle
Adapted specifications: JIS K6718 Evaluates the scratch hardness of various materials and the adhesion of vacuum evaporated or paint film.
T-shape peeling unit
Adapted specifications: JIS P8139 This T-shape unit allows the stable measurement of both peeling resistance and tensile strength.
Peeling clip
Measures the adhesion and removability of adhesive tape or the peeling resistance and tearing strength of combined board layers.