TYPE:38P Hard Coat Evaluation Tester

Uses a newly developed load transducer. Pursuing sensitivity and ease of use.

The newly developed load transducer for TYPE: 38 eliminates unnecessary stress generated when a vertical load is applied, and improves usability. In addition, the structure is such that the force is transmitted directly from the stylus, so the measurement sensitivity is extremely high.

Easy operation with touch panel

Since it is operated by the touch panel, you can easily enter the measurement conditions.
In addition, a color liquid crystal panel is used so that the measurement operation status can be grasped at a glance.

Compatible with various JIS standards

By exchanging the attachment, it is possible to perform tests conforming to JIS K7125 (P8139) and P8147.

Measurement of surface scratch hardness JIS K 5600

A predetermined vertical load is applied to the conical scratch needle, and the scratch hardness is indicated by the size of the scratch width when scratched.
Pencil scratch strength test is also possible.

Measurement of static friction and dynamic friction due to image pressure, linear pressure, and point pressure ASTM D1894

Measurements can also be made by combining image pressure, linear pressure, point pressure, and samples.
The average dynamic friction calculation, which is troublesome and causes individual differences, is also easily displayed. * 1

* Depends on tribo software (optional)

Real-time measurement of changes in frictional resistance due to wear

By repeating the friction of the reciprocating motion, the number of reciprocating movements in which the surface condition changes and the coating peels off is calculated from the increase or decrease in frictional resistance.

Measurement of scratch strength

Scratch strength can be measured in the horizontal direction.