TYPE:30/30S Both-Way Wear Tester
The Simplest Both-Way Wear Tester
This tester is focused on wear testing evaluation by visual inspection. The Basic Grade Type: 30, and the Type: 30S with non-staged high speed adjustment function and specified rotation number auto stop function, are available.
In addition, the 2-series and 4-series specifications, in which testing can be carried out a number of times under the same conditions, are also available.
Power supply: 100 V AC only. A step-down transformer is required for use outside Japan.
Possible to Change the Travel Speed and Distance in Stages
According to the eccentric cam mounting position, the table travel speed and distance can be set in stages.
Additionally, the Type: 30S allows setting of non-staged travel distance using a digital dial.
Simultaneous Testing also Possible using Multiple Samples (Option)
By setting several balance arms, simultaneous testing of multiple samples can be carried out under the same conditions, shortening the testing time and reducing the variations due to differences in conditions.
* For TYPE:30S, separate measurement jigs may be required.
TYPE:30S : 30-12000mm/min* Possible to be changed on request
TYPE:30S : AC Induction Motor (Variable type)
TYPE:30S : 10-50mm (4-stage switching)*Possible to be changed on request
TYPE:30S : With Specified Rotation Number Auto Stop Function up to 999,999 Times
Acrylic Cover 1 unit, Parts Case 1 box, Operation Manual 1 book
Speed and Travel Distance Changing, etc.