TYPE:34 Rotating Drum/Both-way Sliding Combined Friction and Wear Tester
Two Types of Testing in One Instrument! Both-way Sliding Testing and Rotating Drum Testing
This friction and wear tester allows not only the same sliding testing as that offered by TriboStation, but also enables rotating drum testing. Adding to the same sliding testing that was possible with previous friction and wear testers, rotation drum testing can also be carried out.
The friction and wear tester provides two functions in the same machine, so that testing of photosensitive drums and supply paper rollers can be measured with the same rotation used under the actual measurement conditions, while paper and plate-shaped samples can be measured by straight line both-way sliding testing.
Power supply: 100 V AC only. A step-down transformer is required for use outside Japan.
Regardless of the Materials, Combinations can be Freely Made
In addition to the weight addition method using proven weights, the pressing method appropriate for rotating drum testing using a loading converter is also supported.
It has become possible to carry out monitoring of variable pressing loading.
Wear Testing has been Simplified
A considerate design allows easy switching from rotating drum testing to both-way sliding testing.
Additionally, a function that automatically stops when the specified number of rotations or specified friction is reached is also included to allow wear testing to be easily carried out.
Vertical Loading : 1-1000g (Using balance arm structure + weights),
0-10mm Loading Converter Pressing Method (Max. 9.8N)
Fulcrum Part Vertical Motion : 0-150mm
Dynamic Strain Amplifier : 0-9.8N=0-5V Analog DC Output
Limiter Function : Table Auto Stop After Attaining Specified Friction During Straight Line Both-way Sliding Repeat Mode
Measurement Position : Sample Lengthwise Direction Center Part (Only during Rotating Drum Mode)
(Manufacture possible for specified position)
3ch Software for X, Y, Z friction monitoring